2-Channel Power Amplifier with DSP and Ethernet
for Portable and Permanently Installed Applications
- 600 Watts per Channel @ 8 Ohms
- 1200 Watts per Channel @ 4 Ohms
- 1200 Watts per Channel @ 70V fitted with DSP and EtherNet Network cards
Legendary Powersoft efficiency:
- Compact and space saving:1 RU at 358 mm / 14.1’’ depth
- Green Audio Power®: minimal “carbon footprint” and operational cost of electricity
- More watts, less weight: up to 5,000 W in 7.3 kg / 16 lb
Driving distributed line systems:
- Able to drive 70 V distributed lines directly without the need for transformers 1) 2)
Unique Powersoft technology for efficient, reliable performance:
- Switch mode power supply, internally switchable 230/115 V nominal
- Fixed frequency switch mode amplifier output stages
- Patented amplifier output filters with ripple cancellation network
Direct PC/network connection:
- Ethernet interface for system setup, monitoring and control
- Fully manageable via Armonía Pro Audio Suite™ software
- On the same network as all the other Powersoft amplifiers
Top-grade DSP on board:
- Dual 24-bit A/D & D/A with high dynamic range; crossover filters for bi-amped and tri-amped systems; separate input and output EQ’s with numerous filters of various types up to 48 dB/oct; peak, RMS, and frequency dependent RMS limiters; delay for driver time alignment
- Comprehensive system/load monitoring
Four presets on board with selection button
Optimized for 4 Ω loads, thus ideally matching real-world scenarios in targeted
applications
Fully protected circuit design:
- AC protection: shuts down power supply when AC mains voltage is outside operating range
- Clip limiter: prevents severely clipped waveforms from reaching
loudspeakers, while still maintaining full peak power output - DC protection: protects against infrasonic signal at the outputs
- VHF protections: protects the loudspeakers against destructive non-audible,
non-musical high frequency signals - Short circuit protection: protects the amplifier from short circuit or similar
events on the outputs; with automatic protection reset - Thermal protection: mutes outputs once output devices reach 75 ºC / 167 ºF;
automatic unmute once temperature is down to 65 ºC / 149 ºF
Temperature controlled continuous variable speed fan, front to rear airflow
Recessed stepped level attenuators
SP and Ethernet port
Click here for product details